Preparation for wheel config
One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 4x4+2 — and SDP3 shows it in the chassis specification.
Factory variants
How to read it
Preparation for wheel config belongs to the axles, suspension & steering group of the Scania specification. The variant tells you what the vehicle was ordered with — without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.
Related specifications
| ABS_conf_r_axle | 3 variants | Open |
| ACL aut. chassis lubrication | 3 variants | Open |
| AdBlue level display | 3 variants | Open |
| Adjustable shock absorber driver side | 2 variants | Open |
| Adjustable shock absorber passanger side | 2 variants | Open |
| Adjustable steering wheel | 6 variants | Open |
| Air bag in steering wheel | 2 variants | Open |
| Preparation for toll collect | 2 variants | Open |