Skip to content
Chassis, bodywork & dimensions 16 factory variants

Mounting plate

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 15 mm flat — and SDP3 shows it in the chassis specification.

Factory variants

15 mm flat
40 mm (ondulated) SCANIA
40 mm (ondulated) JOST
100 mm
Without
12 mm flat
10 mm plan
20 mm flat D-max 260
16 mm flat D-max 260
16+25 mm flat D-max 260
16+25 mm flat D-max 260 HD
22 mm D-value max 152 kN
40 mm D-value max 152 kN
40 mm D-value max 260 kN
40 mm D-value max 152kN HD
40 mm 170kN

How to read it

Mounting plate belongs to the chassis, bodywork & dimensions group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

ADR maximum train weight 30 variants Open
ADR vehicle designation 9 variants Open
AdBlue tank 9 variants Open
Adaptat. interacting subframe 2 variants Open
Air defl. delivery procedure 3 variants Open
Air susp raised chassis height 3 variants Open
Air.tank volume 3 variants Open
Alpha-angle 23 variants Open