Hazard warning lamp rear
One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example With — and SDP3 shows it in the chassis specification.
Factory variants
How to read it
Hazard warning lamp rear belongs to the electrical, lighting & electronics group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.
Related specifications
| 12/24V sockets | 10 variants | Open |
| 230 volt socket activation bu | 2 variants | Open |
| 5th wh pneum lock ctrl version | 2 variants | Open |
| ACC | 2 variants | Open |
| Acceleration control | 4 variants | Open |
| Hazard warning lamp on roof FFU | 4 variants | Open |
| Hazard warning lamp rear FFU | 1 variants | Open |
| Hazard warning light bar roof FFU | 6 variants | Open |