Skip to content
Engine & cooling 33 factory variants

Alternator charge

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 35 A — and SDP3 shows it in the chassis specification.

Factory variants

35 A
55 A
75 A
100 A
115 A
120 A
175 A
90 A
45 A
105 A
1x17 A
65 A
65 A + 65 A
90 A + 65 A
140 A
70 A
80 A
100 A + 100 A
155 A + 155 A
155 A
150A+100A
180 A
150 A + 150 A
Without
100 A + 65 A
130 A
150 A
180 A + 180 A
120 A + 120 A
200A
200A+200A
80 A + 80 A
Not valid

How to read it

Alternator charge belongs to the engine & cooling group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Alternator capacity 31 variants Open
Alternator charge placing 10 variants Open
Alternator control adaptive 2 variants Open
Alternator coupling 4 variants Open
Alternator diagnostic 2 variants Open
Alternator engine mounted 3 variants Open
Alternator regulator type 2 variants Open
Alternators twin mounted 3 variants Open