Engine & cooling 29 factory variants

Droop and throttle config

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example Standard 1800 — and SDP3 shows it in the chassis specification.

Factory variants

Standard 1800

Standard 1900

Standard 2100

Standard 2300

Excavator 1

Excavator 2

Excavator 3

Excavator 4

Excavator 5

Wheel loader 1

Wheel loader 2

Wheel loader 3

Wheel loader 4

Wheel loader 5

Fork lift 1

Fork lift 2

General 1

General 2

General 3

General 4

General 5

General 6

General 7

General 8

General 9

General 10

Oshkosh 1

SW chain 0

not valid

How to read it

Droop and throttle config belongs to the engine & cooling group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

A/C compressor VCB	2 variants	Open
A/C compressor control via ECU	2 variants	Open
ABS control valve generation	1 variants	Open
AC belt adapted compressor pulley diameter	6 variants	Open
AC pulley on engine	6 variants	Open
Accelerator control	9 variants	Open
Droop setting all speed engine	3 variants	Open
Droop setting single speed eng	22 variants	Open