Skip to content
Gearbox & driveline 97 factory variants

PTO left hand side mounting for automatic gearbox

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 277/B-1350/1410 — and SDP3 shows it in the chassis specification.

Factory variants

Without
277/B-1350/1410
277/B-DIN5462
277/D-1350/1410
277/D-DIN5462
277/D-SAE B
277/G-1350/1410
277/G-DIN5462
277/M-1310/1410
277/D-DIN 100
277/G-DIN 100
277/S-DIN 5462
277/G-SAE B
277/S-DIN 100
277/B-DIN 100
277/S-1310/1410
859/G-1410
859/G-DIN5462
859/J-1410
859/J-DIN5462
859/M-1410
859/M-DIN5462
859/R-1410
859/R-DIN5462
859/T-1410
859/W-1410
859/J-DIN 100
859/M-DIN 100
859/S-1410
859/R-DIN 100
859/JXDIN5462
859/G-DIN 120
859/JXDIN 100
859/J-DIN 120
867/G-1410
867/G-DIN5462
867/R-DIN5462
267/D-DIN 100
267/B-DIN5462
267/D-DIN5462
278/D-DIN5462
897/A-DIN5462
859/MXDIN 100
859/MXDIN 120
859/TX1410
877/F-DIN5462
877/E-1410
877/D-DIN5462
877/A-DIN5462
877/A-1410
877/E-DIN5462
877/C-DIN5462
877/B-DIN5462
890/C-DIN5462
890/F-DIN5462
870/E-1410
870/A-1410
870/D-DIN 100
870/B-1410
870/G-DIN 100
870/E-DIN5462
870/A-DIN 100
870/D-1410
870/D-DIN5462
870/A-DIN 120
870/A-DIN5462
870/F-DIN 100
870/E-DIN 100
870/B-DIN 5462
870/B-DIN 100
870/C-DIN 100
870/C-1410
870/H-1410
870/C-DIN5462
280/C-1410
280/C-DIN 100
280/C-DIN5462
280/C-SAE B
280/D-1410
280/D-DIN 100
280/D-DIN5462
280/D-SAE B
280/G-1410
280/G-DIN 100
280/G-DIN5462
280/G-SAE B
280/M-1410
280/M-DIN 100
280/S-1410
280/S-DIN 100
280/S-DIN5462
280/K-DIN5462
280/B-DIN100
870/F-1410
870/J-DIN 100
870/F-DIN5462
870/J-DIN5462

How to read it

PTO left hand side mounting for automatic gearbox belongs to the gearbox & driveline group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Active prediction gear sim qty 1 variants Open
Autom neutral gear button type 2 variants Open
Automatic neutral gear 3 variants Open
Axle gear first 60 variants Open
BWE control unit I/O PTO configuration 19 variants Open
Clutch frictiontype 99 variants Open
Clutch freq activat prot mode 3 variants Open
Clutch overload warning 3 variants Open