PTO EG1 — engagement feedback
SOPS parameter PTO_EG1_FEEDBACK · seen in 1 SOPS files
What it controls
Specifies whether the coordinator expects a feedback signal (a pressure or position switch) confirming that the EG1 power take-off is actually engaged. With feedback, the cluster indication and the bodywork status output reflect the real mechanical state and the coordinator can detect a PTO that failed to engage; without feedback, the status simply mirrors the request. Retrofitted PTOs often come without a feedback switch — in that case the parameter must be Without, otherwise the coordinator waits for a signal that never arrives and reports the PTO as not engaged even though it is turning. Match this parameter to the hardware actually installed.
Possible values
Withseen in 1 filesA feedback switch is fitted and monitored.
WithoutNo feedback — status follows the engagement request.
Related parameters
PTO EG1 — indicator lampBWE.PTO_EG1_INDIC_LAMP |
Without · With | Read |
PTO EG1 — external control via bodywork interfaceBWE.PTO_EG1_EXTCON_WITH |
Without · With | Read |
PTO EG1 — reverse gear dependencyBWE.PTO_EG1_GEARBOX_IN_REVERSE_DEP |
Without · With | Read |
PTO EG1 — engage only below engine speedBWE.PTO_EG1_ACT_BELOW_ENGINE_SPEED |
Without · <rpm> | Read |